A real challenge
AUTOSAR (AUTomotive Open System ArchitectuRe) defines standards, on which the implementation of future automotive applications will be based. By following these standards, it will be possible to manage the growing embedded electronic complexity of the development of automotive functionality. The AUTOSAR standard definition is resulting in a powerful and complex set of specification documents (More than 150 today) which are divided in many more requirements: each of them can contain up to 600 requirements. In addition, managing multi-level requirements together with their generic and specific applicability increases the complexity of aggregating the right set of requirements for a given software module development.
Value Proposition
GEENSOFT, Premium Member AUTOSAR, is proposing Autosar-RM™, a dedicated plug-in of its engineering requirement management tool Reqtify™; Autosar-RM™ helps navigate the multi-level, highly populated, AUTOSAR requirements. Furthermore, it extracts and consolidates - for a dedicated AUTOSAR development project - the requirements, and only those, which are mandatorily relevant to the project. Next steps in the requirement management process are fulfilled by Reqtify which ensures traceability automation, coverage assessment and impact analysis of requirement changes along the entire development cycle.
This approach provides all development stakeholders <<Autosar SW developers, OEMs & Tier 1-2, Service Suppliers, Tool Vendors>> with a quick and easy view on the degree of conformance to the standard and - as the standard changes and evolves – on the remaining effort to adapt the changes and eventually achieve complete coverage.
The benefits for each actor in the AUTOSAR development chain are manifolds :
- Speed up AUTOSAR specifications adoption (learning) phase
- Navigate only requirements dedicated to a given project scope
- Manage the exact specification coverage and changes at any time
- Increase confidence level in the AUTOSAR comprehensive coverage of the project
Overview
Modules list
 |
AutosarRM proposes a wide list of module ensuring compliance with AUTOSAR Specifications Contents. GEENSOFT is offering specific packs and Modules. All those modules could be purchased separately.
|
 Basic
Software Generic Requirements Package - WP1.1.2 |
SPAL
EEPROM Module - WP4.2.2.1.12 |
| Coupling
of Graphical Development Tools to AUTOSAR - WP1.2 |
SPAL
FLASH Module - WP4.2.2.1.12 |
| Runtime
Environment Module - WP4.2.1.1 |
SPAL
GPT Module - WP4.2.2.1.12 |
| CAN
Module - WP4.2.2.1.1 |
SPAL
ICU Module - WP4.2.2.1.12 |
| LIN
Module - WP4.2.2.1.1 |
SPAL
IO Hardware Abstraction Module – WP4.2.2.1.12 |
| Network
Management Module - WP4.2.2.1.2 |
SPAL
MCU Module – WP4.2.2.1.12 |
| Diagnostic
Module - WP4.2.2.1.4 |
SPAL
Memory Hardware Abstraction Layer - WP4.2.2.1.12 |
| Flexray
Module - WP4.2.2.1.5 |
SPAL
PORT Module - WP4.2.2.1.12 |
| Gateway
Module - WP4.2.2.1.6 |
SPAL
PWM Module - WP4.2.2.1.12 |
| Memory
Services Module - WP4.2.2.1.8 |
SPAL
RAM Module - WP4.2.2.1.12 |
| Mode
Management Module - WP4.2.2.1.9 |
SPAL
Serial Peripheral Interface Module - WP4.2.2.1.12 |
| Operating
System Module - WP4.2.2.1.11 |
SPAL
Watchdog Module - WP4.2.2.1.12 |
| SPAL
ADC Module - WP4.2.2.1.12 |
|
| SPAL
DIO Module - WP4.2.2.1.12 |
Terms and conditions
See AUTOSAR-RM Terms and Conditions just below:
- Reqtify 3.0 or more Users
- Each modules separately or modules bundles
- Annual Subscription – Yearly renewals
- Delivery with AUTOSAR Release 2.0
- AUTOSAR membership
